User's Manual

www.RoperMobile.com CMU056-A1 51
Return To Table of Contents
Advanced Settings
PARTNERSHIP WITH ETHERNET CRADLE:
Note: The “Ethernet Partnership” is only possible with ActiveSync 3.7 or 3.8.
The Ethernet connection requires the use of a cradle model # and an Ethernet cable connected between the
cradle and your network. Refer to the “using the Cradle” section for further instructions.
An initial Ethernet connection normally requires a “Partnership” with your “Host” computer using a serial or
USB port. Roper Mobile Technology has made these following programs available to assist in the creation of
the “ Ethernet Partnership” when using the Ethernet cradle:
SetPartnerShip.exe (Already installed on the CE3000B unit)
PartnerShip Server.exe (This program must be downloaded)
Download PartnerShip Server.exe
Go to http://www.support.daptech.com
Refer to CE.NET PUBLIC DOWNLOAD
Copy to a folder that will be easily accessible; e.g. Desktop Folder.
•
•
1.
2.
3.
Create rst Ethernet partnership
Install the CE3000B unit into its Ethernet Cradle
and wait until the network has been detected.
Launch PartnerShip Server.exe on the Host
computer.
1.
2.
Click on arrow to see more icons
if network icons are not visible.
Network connection
is established.