User's Manual

44 CMU056-A1 www.RoperMobile.com
Return To Table of Contents
Testing the Reader
To test the reader, click on:
a) Start
b) Program
c) DAP Utilities
d) CE Pad
To activate reader, press the ‘trigger’ button.
Hold the unit steadily at a distance
of 10 cm (4 in), from the barcode.
WARNING
Do not move the unit while scanning or scan will
not function.
1.
2.
3.
BARCODE READERS (CONTINUED)
2D Barcode Reader
This special option is usually installed and congured in-house at the manufacturer’s.
The 2D Barcode Reader is primarily controlled by the client application and a special driver. Therefore, please
refer to your application specialist or supervisor for further instructions.
Note: You may also refer to the CE3000B Technical Guide located on DocuDap for further instructions on
Adaptable Endcap Options
Note: Unlike the laser scanner, the 2D reader does not “swipe” the barcode, but rather, it takes a photograph
which is then recognized and interpreted by the unit. The photograph can be taken from any direction.
The 2D Barcode Reader will emit a red beam allowing the user to adequately focus on the barcode needing
to be read.
Once the reading has been completed, the device will emit a sound and the conrmation LED will turn green
for a moment. The numeric code will then be displayed on the screen.
You can release the trigger an any time to cancel the scanning. Two short beeps indicate that scanning has
ended.