User's Manual

48 CMU056-A1 www.RoperMobile.com
Return To Table of Contents
The CardMan
®
5121 is based on a 13.56 MHz contactless Smart Card Interface that is compliant with ISO
Specications 14443 A, B and 15693. The reader works with a variety of 13.56 MHz contactless Smart Cards
including but not limited to:
Philips: MIFARE
®
, DESFire
®
, MIFARE ProX
®
Smart MX, and i.code;
HID: ICLASS
®
Texas Instruments: TagIT
®
ST Micro: x-indent, SR 176, SR 1X 4K
Infineon: My-d (in secure mode UID only)
Atmel: AT088RF020
Host Interface
USB 2.0 CCID (also supports 1.1) √
Transmission speed
12 Mbps
Power Supply
Bus
Powered
Max.
U25mA
Contactless (RFID) Smart Card Interface
ISO 14443 A √
ISO 14443 B √
ISO 15693 √
Compliance
Microsoft
®
WHQL Certified √
USB 1.1 & 2.0 √
API
PC / SC Driver √
Synchronous API ( On top of PC/SC) √
Note: A basic Demo Program can be provided upon request. Contact your Customer Service Representative
nearest you.
•
•
•
•
•
•
SMARTCARD READER (CONTACT & CONTACTLESS)
Operation Guide
PC/SC Driver Support
Windows CE 3.0 Support
/ CE.NET (depend-
ing on the software)
√
Hardware Specications
Dimensions (LxBxH)
57 x 40 x 1.5 mm
Weight
20 grams
without Contact
Connector;
40 grams with
Contact Connector
Operating Temperature 10 - 55° C
(32-131° F)
Operating Humidity 10 - 90 % rH
Meantime Between
Failure (MTBF)
500,000 hours
Safety & Environmental Standards (pre-certied)
CE, FCC & UL √