User's Manual

38 CMU056-A1 www.RoperMobile.com
Return To Table of Contents
MONITORING THE PROCESS ON A 3 SERIAL PORT CRADLE
A unique feature of the 3 Serial Port Cradle will allow you to monitor the process on the CE3000B screen.
Note: A driver is required to ensure the 3 Serial Port Cradle (CBCE340BV) works correctly. For more
information on the installation and conguration of the cradle, refer to the CE3000B Technical Guide located
on Docudap technical web site.
Operation Guide
Cradle is powered and driver is installed
correctly when the task bar displays the
following icons.
When communication begins and data is
being transferred, additional icons will appear
to indicate communication status.
Serial Port Connector Pin-Out
Ports 1 2 & 3 on the CBCE340BV Cradle
•
•
PIN DESCRIPTION TYPE
1 CD Carrier Detect INPUT
2 RX Receive Line INPUT
3 TX Transmit Line OUTPUT
4 DTR Data Terminal Ready OUTPUT
5 GND Ground
6 DSR Data Set Ready INPUT
7 RTS Request To Send INPUT
8 CTS Clear To Send OUTPUT
9 RI Ring Indicator