User's Manual

www.daptech.com CMU061-A (preliminary) 23
Operation Guide
TOUCH SCREEN CALIBRATION
The unit comes with a calibrated touch screen. Should
you have to re-calibrate the touch screen or would you
get the calibration menu displayed, just follow the steps
below.
1. Launch the HHC applet under Control Panel
Click Start > control Panel > HHC
2. Select the Touch Setting Tab then click the
Calibrate Touchscreen button
3. Touch the center of the circle for a few
seconds. Repeat operation as the circle
moves to another location, until you get the
message that the touch is calibrated.