User's Manual

Rugged Tablet PC
43

CHAPTER 4 EXPANDING YOUR TABLET PC
4.1 How and When to Use BIOS Setup
For enter to the Tablet PC BIOS setup, you need to connect with an external USB keyboard,
press “Del” key when the prompt appears on the screen during start up. The prompt screen
shows only few seconds so need press Del key quickly.
**NOTICE
Updated BIOS version may be published after the manual is released. Check with the
latest version of BIOS on website.
You may need to run BIOS setup utility when the below status.
1. Error message on sreen indicate to check BIOS setup.
2. Restoring the factory default settings.
3. Modifing the specific hardware specification
4. Want to optimize the specification.
In order to control the keyboard to select BIOS utility setup, you need
**NOTICE
You can
press the F1,
F2, F3,
F4, –/+, and
Esc keys by
connecting a
USB
keyboard to
your tablet PC.
Make sure that
the item
“Legacy USB Support” under the Main menu is set at Enabled (default).
Item Description Note
Default Packing Accessories
1
1 piece of Rugged Tablet PC Quick Start
Guide.
2
1 piece of CD for Recovery CD for Operation
System (Windows embedded standard 7).
3 1 piece of CD for M970D Manual.
4
1 piece of 12V Adapter w/ Standard Power
Cord. (Euro / U.S. Std type, 1.8m)
5 LAN (female) Adapter cable
6
Optional Accessories
1 Table Stand
2 HDMI
(
f
e
m
a
l
e)
A
dapte
r
cab
l
e