User's Manual Part 1
1-18 Getting Started
Turning Off
To turn off the Tablet Computer, use the “Shut Down” command of your
operating system.
CAUTION: Wait for at least ve seconds after turning off the Tablet Computer before turning
it back on.
When you nish a working session, you can stop the Tablet Computer by
shutting it down or leaving the Tablet Computer in Sleep or Hibernation mode:
To stop in
this mode...
Do this...
Off Use the Windows Start Menu and follow the shut down
procedure.
You can force the Tablet Computer to turn off by pressing and
holding the power button (
) for more than 6 seconds. This
is not the recommended method, but may be necessary if the
system is locked up.
Hybrid Sleep
Short press the power button (
) or use the Windows Start
Menu to put the Tablet Computer in Hybrid Sleep mode.
Hibernation Use the Windows Start Menu to put the Tablet Computer in
hibernation mode.
Press the power button (
) to resume or turn on the Tablet Computer from any
of these modes. See “Power Management” on page 4-6 for more information.
NOTE: By conguring the BIOS Setup Utility, you can have the Tablet Computer automati-
cally start up or resume when the external AC power is plugged in. See”BIOS Setup” on page
6-2 for more information.