Installation Guide

10
ENGLISH
QL292
Installation (continued)
PLACEMENT
1. Move the assembled unit to its nal location. Final hook up of the supply lines and drain system can now be completed.
2. Once the sink is in place, use a carpenter’s level to check the horizontal and vertical alignment of the utility sink. Adjust the leveling
feet as needed so that the unitlity sink is level and does not wobble.
SUPPLY LINES (NOT INCLUDED)
The supply lines that attach the faucet to the household
water system, are not supplied with this unit. They need to be
purchased separately.
Follow the manufacturers instructions for proper installation of
the supply lines.
Maintenance
CARTRIDGE REPLACEMENT
1. Turn off the water supply to the faucet at the nearest
shut-off valve.
2. Remove water indicator and make note of its color
orientation.
3. Unscrew the screw using the hex key.
4. Remove the handle.
5. Unscrew the cartridge nut.
6. Remove the old cartridge.
7. Insert the new replacement cartridge.
8. Install the cartridge nut. Do not over-tighten.
9. Install the cap. Do not over-tighten.
10. Install the handle and secure it with the screw.
11. Insert the plastic indicator back into the handle with the
colors oriented as previously noted. Red is normally on
the left.
Handle
Water indicator
Screw
Cap
Nut
Cartridge
Faucet body