Installation Guide

7 CONGLOMKB.COM
Please contact [e-mail] or 1-877-333-0098 for further assistance.
ENGLISH
Installation (continued)
STRAINER INSTALLATION
1. Apply a ring of sealant to the underside of the strainer ange.
2. Insert the strainer body into the sink.
3. Assemble the rubber gasket, friction washer and locknut onto
the strainer body from under the sink.
4. Hand tighten the locknut. Do not over tighten the locknut as it
may split or deform the strainer body.
5. Remove excess sealant from around the strainer body.
Sealant
Basket
Strainer body
Rubber gasket
Friction washer
Locknut
Sink