Installation Guide

8
ENGLISH
QL292
Installation (continued)
BASE INSTALLATION
CAUTION: Do not place side load onto feet when rotating
the cabinet.
K
G
J
A
1. Unpack the unit and place the sink on a blanket or cardboard
to protect the surface.
2. Turn the cabinet (A) upside down onto the protective surface.
3. Gently attach the cabinet base (G) onto its proper location.
Using the supplied base screws (J), attach the base to the
cabinet.
4. Attach cabinet feet (K) to the base. Retract each foot all the
way down.
5. Gently place the cabinet upright.
DOOR HANDLE INSTALLATION
F
H
1. Insert the door handle screws (H) into the pre-drilled holes in
each door.
2. Attach the door handles (F) and hand tighten the door handle
screws (H) using a screwdriver.