Installation Guide

6
QL302
Installation
BASE INSTALLATION
1. Unpack the unit and place the sink (D) on a blanket or
cardboard to protect the surface.
2. Turn the cabinet (E) upside down onto the protective surface.
3. Gently attach the cabinet base (C) onto its proper location.
Using the supplied base screws (BB), attach the base to the
cabinet.
4. Attach cabinet feet (B) to the base. Retract each leveling foot
all the way down.
5. Gently place the cabinet upright.
CAUTION: Do not place side load onto feet when rotating
the cabinet.
E
C
B
BB
D
DOOR HANDLE INSTALLATION
1. Insert the door handle screws into the pre-drilled holes in each
door.
2. Attach the door handles and hand tighten the door handle
screws using a screwdriver.
A
AA
DOOR POSITION ADJUSTMENT
If the doors need to be repositioned, the hinges can be adjusted to
ensure a precise t with the cabinet.
1. The lateral adjustment screw adjusts the door left or right.
1
2. The horizontal adjustment screw adjusts the door left or right.
2
3. The vertical adjustment screw adjusts the door left or right.
3