Installation Guide

7 CONGLOMKB.COM
Please contact [e-mail] or 1-877-333-0098 for further assistance.
Installation (continued)
FAUCET AND SPRAYER INSTALLATION
Before installing, carefully unpack the faucet and ensure no
parts are missing.
1. Insert the sprayer housing support through the
pre-drilled hole in the sink corner. Screw the nut onto the
threads and hand tighten.
2. Run the sprayer hose down through the sprayer housing
and up through the centre faucet mounting hole. Connect
the sprayer hose to the faucet and tighten with a wrench.
Do not over-tighten.
3. Install the faucet in the sink with hot water handle
(marked with an H or red indicator) on the left and cold
water handle (marked with a C or blue indicator) on the
right. From under the sink, thread mounting nuts and
rubber gaskets onto the faucet shanks and tighten the
mounting nuts.
4. Connect the water supply lines (not supplied) to the
faucet.
Sprayer and hose
Faucet
Faucet shank
Mounting nut
Sprayer housing
support
Nut
Water Supply Lines