Datasheet

Control and Isolation Transformers
DIN & Screw mounted, EPD series Class II
Page 18c
Technical specifications EPD Series:
isolation class II
Frequency 50/60Hz
Power 60VA - 440VA
Insulation class B
Ambient temperature 40°C
IP class 20
Manufactured according to standards:
EN 61558-2-2
EN 61558-2-4
EN 61558-2-6
Can be manufactured with UL1446 insulation system
Control, safety and isolating single-phase transformers with
IP20 protection index .
For supply of high instantaneous power necessary for correct
operation of contactors , switches and control equipments.
The EPD is designed for DIN- Rail and screw mounting.
There are a wide range of transformers in stock designed for:
Primary: 230V. Secondary: 24V
Primary: 400,440V. Secondary: 230V
All transformers/autotransformers can be manufactured with
desired voltage range in small or serial volumes on request.
Power Primary: 230V, Secondary: 24V Primary: 400/440V, Secondary :230V
Dimensions (mm)
Article number E- number Article Number E- Number
A
B C D E
Ø Hole
Weight
60VA
DT 22664-1 520 20 01 DT 22672-1 520 20 19
90 106 96 68,5 90 4,5 1,4kg
80VA
DT 22665-1 520 20 03 DT 22673-1 520 20 21
90 106 96 68,5 90 4,5 1,5kg
110VA
DT 22666-1 520 20 04 DT 22674-1 520 20 22
90 106 116 68,5 90 4,5 2,3kg
150VA
DT 22667-1 520 20 09 DT 22675-1 520 20 23
90 106 116 68,5 90 4,5 2,4kg
220VA
DT 22668-1 520 20 14 DT 22676-1 520 20 24
126 136 114 96 121 5,5 3,9kg
275VA
DT 22669-1 520 20 16 DT 22677-1 520 20 25
126 136 114 96 121 5,5 4,1kg
360VA
DT 22670-1 520 20 17 DT 22678-1 520 20 26
126 136 124 96 121 5,5 4,8kg
440VA
DT 22671-1 520 20 18 DT 22679-1 520 20 27
126 136 124 96 121 5,5 4,9kg