Cable Box User Manual

CFETF10xx-205
12
24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 [e-mail] -- Click the “Transition Now” link for a live Web chat.
5
Installation -- Continued
Connect the Fiber Cable
1. Locate a 100Base-FX compliant fiber cable with male, two-stranded TX to
RX connectors installed at both ends.
2. Connect the fiber cables to the CFETF10xx-205 media converter as
described:
• Connect the male TX cable connector to the female TX port.
• Connect the male RX cable connector to the female RX port.
3. Connect the fiber cables to the other device (another media converter,
hub, etc.) as described:
• Connect the male TX cable connector to the female RX port.
• Connect the male RX cable connector to the female TX port.
Connect the Twisted-Pair Copper Cable
1. Locate or build 100Base-TX compliant cables, with male RJ-45
connectors installed at both ends.
2. Connect the RJ-45 connector at one end of the cable to the RJ-45 port on
the CFETF10xx-205 media converter.
3. Connect the RJ-45 connector at the other end of the cable to the RJ-45
port on the other device (switch, workstation, etc.).
Connect fiber cable
to media converter
as shown.
Connect fiber cable
to other device
(media converter,
hub, etc.) as shown
RX
TX
RX
TX
RJ-45 Port
Media Converter
RJ-45 Port
On other device
(workstation, switch, etc.)
Point System Chassis
Technical Specifications
For use with Transition Networks Model CFETF10xx-205 or equivalent.
Standards IEEE 802.3™
Data Rate 100 Mb/s
Dimensions 3.4" x 5.0" x 0.87" (86 x 185 x 22 mm)
Weight 3 oz (91 g) (approximate)
Power Consumption 3.5 watts, 200 mA @ 13.9 VDC
MTBF 382,956 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
1,456,260 hours (Bellcore7 V5.0)
Environment Tmra*: 0 to 60°C (32 to 140°F )
Storage Temp: -20 to 85°C (-4 to 185°F )
Humidity 5 to 95%, non condensing
Altitude 0 to 10,000 feet
Warranty Lifetime
*Manufacturer’s rated ambient temperature: Tmra range for the CFETF10xx-205
media converter depends on the physical characteristics and the installation
configuration of the PointSystem™ chassis, in which the module will be
installed.
The information in this user’s guide is subject to change. For the most up-to-date
information on the CFETF10xx-205 media converter, view the user’s guide on-
line at: www.transition.com
This product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION:
Visible and invisible laser radiation when open. Do not stare into
the beam or view directly with optical instruments.
CAUTION:
Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.