Leaflet
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
AUTO NEG
AUTO CROSS
LINK PASS THR
U
LINK RESTORE
AUTO
PAUSE
UPGRADE
REMOTE FIRMWARE
CHANGE
SOURCE ADDRESS
Extend Network Distance
Specifications
Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE
802.3z, IEEE 802.1P, IEEE 802.1q
Data Rate TP (port 1): 10/100/1000Mbps
(-140 model only)
SFP (port 1): 100/1000Mbps
(-180 model only)
SFP (port 2,3): 1000Mbps
Filtering Addresses 8K MAC Addresses
Max Frame Size 802.3ac tagged: 1628 bytes
Untagged: 1632 bytes
Status LEDs PWR: ON green = Power applied to card
TP (Duplex/Link/Activity):
Orange: ON = Half-duplex Link;
BLINK = Activity;
Green: ON = Full-duplex Link;
BLINK = Activity
TP (10Mbps/100Mbps/1000Mbps):
Off = 10Mbs; Orange = 100Mbs;
Green = 1000Mbs
LACT (Fiber SFP Link/Activity):
Green: ON = Link; BLINK = Activity
Dip Switches Switch 1: TX - Enable/Disable Auto-Negotiation
Switch 2: TX - Force 10Mbps or 100Mbps with
Switch 1 off
Switch 3: TX - Force Half or Full duplex with
Switch 1 off
Switch 4: Enable/Disable Fiber Redundancy
(port 2/3)
Switch 5: Enable/Disable primary/secondary
revert with Switch 4 on
Switch 6: Enable/Disable P2 to P3 blocking
Dip Switches Switch 1: Port 1 speed 100Mbps/1000Mbps
Switch 2: Port 1 duplex full/half
Switch 3: Port 1 mode 1000Base-X/SGMII
Switch 4: Enable/Disable Fiber Redundancy
(port 2/3)
Switch 5: Enable/Disable primary/secondary
revert with Switch 4 on
Switch 6: Enable/Disable P2 to P3 blocking
Dimensions Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption 6 Watts
Environment See chassis specifications
Shipping Weight 1 lb. [0.45 kg]
Regulatory Compliance CISPR/EN55022 Class A, EN55024, EN61000,
FCC Class A, CE Mark
Warranty Lifetime
Ordering Info
CGFEB1040-140
10/100/1000BASE-T (RJ-45) [100 m]
to (2) 1000BASE-X SFP Slots (empty)
CGFEB4040-180
100/1000BASE-X SFP Slot (empty)
to (2) 1000BASE-X SFP Slots (empty)
Optional Accessories
(sold separately)
SFP Modules
CGFEB1040-140, CGFEB4040-180
point system™ slide-in-module media converter
Extend Network Distance
Bridge legacy 10/100 devices to a
Gigabit backbone
Protect critical networks with
fiber redundancy
10/100/1000 Ethernet 10/100/1000BASE-T
or 100/1000BASE-X to 1000BASE-X
see also: 10/100/1000 Bridging Stand-Alone Media Converters
10/100/1000 Ethernet Multiport Media Converter
Features
Auto-Negotiation (copper and fiber ports)
Switch Selectable Speeds (UTP) when
Auto-Negotiation is off
AutoCross™
Pause
Far-End-Fault (100Base-FX setting on
-180 model port 1 only)
Automatic Link Restoration
Fiber Redundancy (<50ms switching time)
IEEE 802.1P QoS, IPv4 Tos/Diffserv, IPv6
traffic class
IEEE 802.1q VLAN tagging and double tagging
(Q in Q)
Remote Firmware Upgrade (see page 17)
Virtual Cable Test (VCT) on UTP port
(-140 model only)
Bandwidth Allocation (see page 17)
SGMII support on port 1 for use with
10/100/1000Base-T copper SFPs
(-180 model only)
100/1000Base-X, dual speed support on port 1 for
use with 100Base-FX or 1000Base-SX/LX SFPs
(-180 model only)
DMI, Digital diagnostics per SFF-8472
RMON Counters for each port
(-140)
(-180)