Single-Slot PointSystemTM Chassis with Internal Power Supply User's Guide

6
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
CPSMC0100-210
Troubleshooting
1. Is the slide-in-module media converter properly installed into the single-
slot chassis?
NO
• Ensure the slide-in-module media converter is firmly seated inside
the single-slot chassis. See page 2 for installation instructions.
• Proceed to step 2.
YES
• Proceed to step 2.
2. Is the Power LED on the slide-in-module media converter illuminated?
NO
• Is the power adapter the proper type of voltage and cycle frequency
for the AC outlet? (See “Power Supply” on page 5.)
• Is the power adapter properly installed in the single-slot chassis and
in the grounded AC outlet?
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
[e-mail] -- Click the “Transition Now” link for a live Web chat.
7
Contact Us
Technical Support
Technical support is available 24 hours a day.
United States: 1-800-260-1312
International: 00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto www.transition.com and click the Transition Now link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto www.transition.com and click the Learning Center link.
E-Mail
Ask a question anytime by sending an e-mail to our technical support staff.
[e-mail]
Address
Transition Networks
10900 Red Circle Drive,
Minnetonka, MN 55343, U.S.A.
telephone: [phone]
toll free: 800-526-9267
fax: [phone]
Declaration of Conformity
Name of Mfg: Transition Networks
10900 Red Circle Drive, Minnetonka MN 55343 U.S.A.
Model: CPSMC0100-210 Series Single-Slot PointSystem Chassis
Part Number: CPSMC0100-210
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the CPSMC0100-210 to which this declaration refers is in
conformity with the following standards:
EN 55022:1994+A1:1995+A2:1998 Class A&B; EN 55024:1998+A1:2002; FCC Part 15
Subpart B; 21CFR subpart J; EN 61000-3-2:2001; Telcordia GR-1089-CORE sect. 3.2.2
I, the undersigned, hereby declare that the equipment specified above conforms to
the above Directive(s) and Standard(s).
June, 2008
Stephen Anderson, Vice-President of Engineering Date