Network Card User Manual

MICROSOFT WINDOWS NT 4.0 - SOFTWARE UPGRADE

1. Start Windows NT, and open the control panel by clicking "Start," then "Settings," then

"Control Panel."

2. Double Click on "Network."

3. Click on the Adapters tab.

4. Highlight the existing Transition LANart adapter, and click "Remove." Close the control

panel to effect the change.

5. Re-open the Network control panel, and click "Add," then select "Adapters."

6. Select "Have Disk."

7. Insert the Transition Driver Disk into the drive

For the NDIS4 MINIPORT driver, type at the prompt:

"A:\Winnt_mini4\" and click "OK."

8. Choose the appropriate Transition / LANart (EFA020X) Adapter and Click on "OK"

9. Click on "Properties" - Choose the appropriate properties as required by Network

Administrator for the driver to work properly.

10. Select "OK" to exit the Network control panel, and Select "OK" when prompted to restart

your machine. Remove the Transition Driver Disk.

11. If this is your first adapter installation, you will be prompted to insert your original

Windows NT CD. Insert the CD, and click "OK" to begin copying files.

12. Click "Close"

13. Protocols may be needed to be configured. Please see your Network Administrator for

details.

14. Restart the computer to begin using your Transition / LANart adapter.