Network Card User Manual

21. When the system comes up open Netowok Neighborhood by right clicking

22. Click on " Properties"

23. Highlight "Transition \ LANart …." And , Click on "Properties"

24. Click on Advanced

25. Chose the properties as required by Network Administrator

26. To access your network, protocols will need to be configured. Please see your network

administrator for details.

27. If your computer is not Plug and Play compatible, open the control panel by clicking

"Start," then "Settings," then "Control Panel."

28. Open the Network control panel by double clicking the "Network" icon.

29. Click "Add" inside the Network control panel, then select "Adapter", and click "Add" inside

the Select Network Component Type window. Select "Have Disk."

30. For the NDIS3 MAC driver, type at the prompt:

"A:\Win95\Mac3" and click "OK."

For the NDIS4 MINIPORT driver, type at the prompt:

"A:\Win95\Mini4" and click "OK."

31. Select "OK" to exit the Network control panel.

32. You will be prompted to insert your original Windows 95 CD. Insert the CD, and click

"OK" to begin copying files.

33. Restart the computer to and follow steps below.

34. When the system comes up open Netowok Neighborhood by right clicking

35. Click on " Properties"

36. Highlight "Transition \ LANart …." And , Click on "Properties"

37. Click on Advance

38. Chose the properties as required by Network Administrator

39. Restart the computer. Your Transition \ LANart adapter is now configured. To access your

network, protocols will need to be configured. Please see your network administrator for

details.