Network Card User Manual

MICROSOFT WINDOWS 95 - SOFTWARE UPGRADE
1. Power up the computer, and start Windows 95.
2. The following instruction is to update the driver for LANart network card.
3. Update the driver for Transition Networks / LANart (EFA020X) - open the control panel
by clicking "Start," then "Settings," then "Control Panel."
4. Double Click "system"
5. Click "Device Manager"
6. Double Click "Network Adapter"
7. Highlight "Transition Networks / LANart…." And , Click on "Properties"
8. Click on "Driver" and Click on "Update Driver"
9. Click on "Next" and choose - "No, Select Driver from List."
10. Click "Next" and Highlight Transition Networks / LANart EFA020X Adapter
11. Click "Have Disk" and insert the Transition Network Driver Disk (Disk1)
For the NDIS3 MACdriver, type at the prompt:
"A:\Win95\Macs" and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Win95\Mini4" and click "OK."
12. Click "OK"
13. When prompted for the 95 CD
14. Click <OK> and type the correct path
15. Click <Close> and configure the Adapter
16. When the system comes up open Netowok Neighborhood by right clicking
17. Click on " Properties"
18. Highlight "Transition \ LANart …." And , Click on "Properties"
19. Click on Advance
20. Chose the properties as required by Network Administrator
21. Restart the computer. Your Transition Networks / LANart adapter is now configured. To
access your network, protocols will need to be configured. Please see your network
administrator for details.
6