Installation & Assembly

Instruction for the use of
Model: SA40626
LED POWER SUPPLY
Technical data:
Input voltage: 120V~, 50/60Hz
Input current: 0.55A
Output voltage: DC12V
Power range: 1-30W
Warning: The installation of the electronic LED transformer should be performed by
qualified personnel. Failure to mount and wire the electronic LED transformer and the
fixture in compliance with the National Electronic Code, applicable State and Municipal
Codes and specific U.L. safety standards for the intended working environment may
cause serious personal injury, death and/or property damage. During installation, power to
the electronic transformer and the fixture must be disconnected at all times.
This electronic transformer can only be used to supply low voltage LED lamps
(DC12V). Protection against electric shock should be ensured during the installation.
The electronic transformer is short circuit protected at the secondary side. The lighting
loads of the transformer must neither exceed nor go below the 1-30W range.
www.sensioamerica.com
SA40626