User's Manual

1
4
The R2 does not require any user
interaction to operate. Applying
power to the R2 unit will initiate its
operations.
Basic Indicators
The R2 unit has two basic physical
indicators which are LEDs on the
front panel of the R2 unit.
Power Indicator
This LED should be a constant
GREEN when power is supplied to
the R2 unit. The first step in any
troubleshooting of the R2 should be
to check this indicator.
RF Traffic
This amber LED should flicker on/off
when the R2 is in proximity to any
M2 endpoint radios. This LED
shows the RF traffic and will indicate
if there is a problem with the
antenna/base or if there is a
frequency configuration problem.
Manual Reset Button
The R2 unit has a manual reset
button which cycles power and
resets the R2 microcontroller. This
is not a normal operation and should
only be performed when directed by
T2 Customer Service.
OPERATIONS