User's Manual
Table Of Contents
- Start Radio
- Soft Reset
- Force MIU Read
- LED Indicators
- Green LED will flash during every radio transmission. This will only take place for one minute after a Radio Start and/or a Force MIU Read.
- Red LED will flash during every radio transmission that has a tamper count (a failure to obtain an error-free reading of the MIU). This will only take place for one minute after a Radio Start and/or a Force MIU Read.
- LED Indicators
M
M
1
1
Utility
Radio
Transmitter
Transparent Technologies
introduces a simple, cost-effective
utility radio. The M1 radio is a
one-way transmitter which requires
no field configuration and is
compatible with existing utility
systems. The M1 operates in an
unlicensed mode in the 900-Mhz
range which requires no utility
regulation.
SPECIFICATIONS
Transmission: Base Mode Only
Regulatory: FCC Section 15.249
Temperature: -40°F to 158°F (-40°C to +70°C)
Humidity: 100%
Submersion: IP-68 Rating
Packaging: PCB and Connectors 100% Gel-encapsulated
Modified ABS-Marine Housing
Meter Interface: 3-Wire Encoder (ECR-II protocol)
Battery: Replaceable
Thionyl-Chloride Lithium
8.5 A-hr C-cell
Battery Life: 10 Years +
Transparent Technologies, Inc.
www.transparenttech.com