User Manual

Revision - 1.0
13
Magnetic Sensor
When using the TIM for a magnetic sensing application, ensure the magnet is properly installed on
the designated side. This will be marked on the TIM box to aid in proper alignment.
The TIM is by default setup to detect the magnet when within 4” or less and will ignore the magnet if
it’s at 6” or greater. If your application is different, please work with you installation tech for a
customized solution.
Contact an installation tech for confirmation that the TIM box is properly detecting when the magnet
is present and when it is absent.
>6” /
<4” /
Open
Closed
Measure from
here