User's Manual

Appendix D. Frequently Asked Questions

Q: The GPS Demo software GpsView doesn’t seem to be making any

connections with my Bluetooth GPS receiver. How do I make it work?

A: You will need to make sure your PDA is paired with Bluetooth device.

Follow the section “Chapter 2. Getting started > Step 3 Connecting your

handheld device with the CBTGPS” to make sure that your PDA is

recognizing the Bluetooth GPS receiver properly. If so, you will need to

connect with the device by going to the Bluetooth Manager and

double-tapping on the CBTGPS icon.

Q: My Bluetooth GPS Receiver seems to be receiving the satellite signals,

but I am unable to establish a connection between the receiver and my

PDA. How can I make a connection?

A: Go to the Bluetooth Manager on your PDA. Locate the “CBTGPS:

SPP Slave” icon and tap and hold. A pop-up menu will appear, select

Delete.

Next, perform a soft reset on your PDA.

Once your PDA has finished resetting itself, go back to the Bluetooth

Manager screen and perform the typical setup and connection procedures

for your Bluetooth receiver (for help with connection please review the

section “Chapter 2 Getting started > Step 3 Connecting your handheld

device with the CBTGPS”).