User's Manual

sDAS
+
User Manual
10
3 SYSTEM PROVISIONING
The following sections describe the basic system provisioning procedure including
 Topology Setting
 DAS Setting
 Calibration
that can be done on sDAS Web GUI.
The default information to access Web is listed as below.
IP Address
192.168.100.20
Username
Admin
Password
Wireless
3.1 Topology Setting
Go to Web page: Configuration > DAS Topology Setting, and follow the steps below
to setup sDAS+ topology
1. When loading Topology Setting web page, system scans on all fiber ports. And,
shows the light blue circle on corresponding ports for RAUs detected.
2. Click “Set” button, and system will show the fiber loss in dBm.