User's Manual

Reset the camera to factory default (See Fig. 9.)
When the camera has been on for at least 1 minute, press the reset button (using a
small object or a pin) for 5 to 10 seconds.
The camera will beep 3 times and take about 1 minute to reset. The LED will start to
blink a dark orange color.
Note 1: If you do not hear a beeping sound, reset has failed. Please turn the
camera back on and press the rest button again.
2: If you replace a new Wi-Fi router or if you forget the camera password,
the camera needs to be reset to factory default.
Please refer to 3.3 - First time setup in the user manual, to set up the
camera again.
Operation Mode
4
Viewing Live Video. See Fig. 10.
1. Camera name
2. Date and Time display
3. Online Number/ Resolution/ Frame Rate display
4. Information :
Tap the icon to get information about the camera. See Fig. 11.
5. Record :
Tap the icon to start record process when SD card is inserted.
6. Audio on/off and Talk back :
Tapping the icon can turn on/off sound or talk back to camera.
: audio on
: talk back
: mute
7. Snapshot :
Tap the icon to save a snapshot of the camera on your
smartphone or tablet.
8. Photo folder :
Tap the icon to see all of the photos you have taken.
Camera Setting
Tap the icon to enter camera setting screen. See Fig. 12.
Note: For security and management purposes, the “Camera Password” and
“SD card Safety Remove” functions cannot be set when your
mobile phone and camera are not connected to the same Wi-Fi router.
12
3.4
4
4.1
4.2