User's Manual

Night vision

The camera has nine high-intensity LEDs for picking up clear images in the dark.

When the built-in photo sensor detects low ambient light levels, the LEDs will

automatically activate.

1.5

Monitor Setup

Power Supply

The monitor uses 3.7V 1000mAH (Li-ion) battery or the household AC power

current.

Loading the Battery

1.Open the battery compartment cover on the rear of the monitor. See Fig. 8.

2.Insert the battery with the metal facing the battery compartment. See Fig 8.

3.Close the battery compartment cover, and make sure it is locked securely.

4.Turn the monitor on. See Fig 8.

Note 1: When power is sufficient, the light is green ; When power is low,

the light is red.

Note 2: Remove the battery from the monitor if you do not plan to use it for a

prolonged period of time.

5.Adjust the volume to a comfortable level.

Using AC Power

1.Plug one end of the provided power adapter into a wall outlet and the other end

into the bottom of the monitor. See Fig. 9.

Note: Use the adapter labeled OUTPUT: 6V DC with the monitor.

2.Turn the monitor on. See Fig. 9.

3.Adjust the volume to a comfortable level.

Note 1: When charging starts, and "Power" will lights up in blue . If charging

is finished (full charge), the "Power" lamp will turn into green

Note 2: If the camera and the monitor link each other , the "Link" LED will

light up in green; otherwise, the "Link" LED will light up in red.

Brightness Setting

Press the Brightness selection button & to adjust brightness. See Fig. 10.

2.1

2.2