VSC-5882A 5.
Contents 1.Important Safety Information........................................1 2.Specification............................................................. .1 3.Package Content ........................................................2 4.Panel Control And Function ...................................... .. 2 5.Setup Guide ...............................................................3 1.Important Safety Information To prevent fire or shock hazard, do not expose this product to rain and moisture.
.Package Contents Check to make sure that all units shown as below are enclosed. If something missing, please contact your dealer. 1. 5.8GHz CMOS Camera X 1 2. Cover X1,Screw X 2 3.Power Adapters (12V/300mA) 4. Bracket X1 2.Package 4.Panel Control Contents and Function 5.8GHz COMS Camera 3 5 4 1 2 1 2 3 4 5 DIP-Switch for channel selection. DC power jack, connect to power supply. (8~28VDC). 5.8GHz antenna. Power indicator (red). Lens.
2.Package Contents 5.Setup Guide + Fig. 1 1 According to the diagram, Connect the DC plug of the power adapter to the DC jack, and connect the power adapter to an outlet(As shown in Fig.1). 2 DIP-Switch for Channel Selection, to find optimal reception, the transmitter and receiver must to be configured as the same channel(As shown in Fig.2). UPPER ON CH1 CH2 1 2 3 CH3 CH4 CH5 CH6 CH7 CH8 Fig.
3 Switch to the optimal channel before put on waterproof cover and fasten the screw. (As shown in Fig 3) Waterproof cover Fig.
Preliminary Specification For VSC-5882 5.8GHz Wireless Outdoor CMOS Camera Document Number： PSC08002 Page of 4 ： 1 Revision ： 1A Date ： 2008-10-31 TRANWO Technology Corp. www.chemlink.com.
1. Introduction This document describes the specifications and features of the CHEMLINK 5.8GHz Wireless outdoor CMOS Camera which use FM modulation technology for wireless A/V transmission. 2. Features Avoids interference from crowded 2.4GHz ISM applications such as video senders, 802.11b WLAN equipment, Bluetooth-enable products, cordless phones, microwave ovens, etc.
Video Input Level Impedance Pre-Emphasis 1V p-p ± 0.15 V p-p Load 75 ohms NTSC & PAL Sensor Image area Array size 1/3” CMOS Sensor 5.961mm*4.276mm 510 X 496 (NTSC) 628 X 586 (PAL) Night Vision Range 10 m LENS LENS focus View angle f6.0mm, F2.0 , (4 glasses with IR cut filter) Fixed 60° Adaptor Bracket DC 12V/300mA Optional Image Illumination LENS Accessory 3.
4. Photograph 4.
