User's Manual

WiMAX Quick Configuration Guide 16
Figure 8. Device Details tab.
6. Complete the fields in the Device Details tab and click Save.
Table 3. Fields in the Device Details Tab
Parameter Description
Name Enter a meaningful name for the Subscriber Unit (e.g., the
location where the Subscriber Unit will be installed).
Device Type Select Tranzeo TR-WMX or appropriate device.
Serial Number Enter the Subscriber Unit serial number recorded on Step 3.
Uuid Enter a unique UUID number.
GPS Optional: Enter the altitude, latitude, and longitude where the
Subscriber Unit will be installed.
Configuration
Management
Accept the default setting.
Remote Access IP Address = enter the Subscriber Unit’s IP address.
A configuration graphical user interface (GUI) is available at
the IP address using the default username admin and default
password default. The Subscriber Unit must be set to the
proper frequency and channel bandwidth to connect to the
Pico Base Station using the subscriber station’s Web-based
GUI. The frequency and the channel bandwidth must match
the values entered before for the Pico Base Station.