User's Manual

WiMAX Quick Configuration Guide 18
Table 4. Fields in the Device Interface Details Tab
Remember that Tranzeo Subscriber Units are not managed by AirSync. Therefore,
manually assigned IP Addresses must be entered in the IP Address field.
Parameter Description
Interface Type Select WiMax. Once you select and Interface type the
physical interface will be active. The default ofdm0 is fine.
DHCP Check to have AirSync fill up this information automatically.
This option only works if AirSync manages the device. Since
the Subscriber Unit device is not managed by AirSync please
do not check this box. Instead manually enter the static IP
address to be used in the IP Address field.
IP Address Enter a static IP address for the Subscriber Unit. Only
available when DHCP is not checked.
Mac Enter the Subscriber Unit MAC address using a : separated
format (Aa:Bb:Cc:Dd:Ee:Ff:00).
Group Add the Subscriber Unit to the group Default. The
Subscriber Unit will inherits permissions from the group if
the Inherit Priority checkbox is selected.