User's Manual

WiMAX Quick Configuration Guide 6
1. Use an Ethernet cable to connect the Ethernet port labeled PC on the PoE
adapter to a network-interface card (NIC) in a PC or network hub. Then
connect the other Ethernet port on the PoE adapter to the Pico Base Station.
2. Launch a Web browser on a computer that is on the same subnet
(192.168.0.nnn) as the Pico Base Station.
3. In the address bar, type http://192.168.0.254 and click the Go button in
your browser. The default username is admin and the default password is
default. After you login, the Base Station Information Page appears.
Figure 1. Base Station information page.