User's Manual

WiMAX Quick Configuration Guide 9
For security, every typed password character appears as a bullet (•). For
additional security, we recommend you change the default password in the
Administrative Settings screen.
4. Click the OK button to log in. The Information Page appears (see Figure 4).
This read-only page displays network, wireless and device information about
your installation.
Figure 4. Information page.
1.3.2 Specify Wireless Settings
After logging in to the Configurator, use the following procedure to set the Subscriber
Unit’s wireless settings.
The default configuration settings for most parameters should work well for the
majority of installations. Only those settings that should be confirmed or adjusted
as part of the quick-start instructions are described in this section.
1. In the left pane, under WiMAX Setup, click Wireless. The Wireless Settings
page appears (see Figure 5).
2. Set the three groups of parameters as indicated in
3.
4. Table 1 and Figure 5. These values must match the ones you entered for the
Pico Base Station.