User's Manual

Chapter 18: Integration with Enterprise Equipment
TR0153 Rev. E1 134
illustrates how to set the parameter for the wlan1 interface such that a user will be required to
login to access the network.
> use sys
sys> set splash.auth.server.enable.wlan1=yes
Web GUI
Splash pages can be enabled on a per-interface basis on the “Splash Pages” sub-tab under
the “AAA” tab on the “System Parameters” page of the web interface (see Figure 59). Setting
whether client login is required can also be set on this page with the “Require Login”
parameter.
Figure 59. Splash page configuration