User's Manual

Chapter 6: Status Information
TR0153 Rev. E1 39
6 Status Information
Multiple web interface pages that display status information about the EnRoute500 and client
devices attached to it are available. These web pages are accessible by clicking on the
“Status” link in the navigation bar and then selecting the appropriate tab shown at the top of
the page.
The status information is not accessible through the CLI.
6.1 Configuration Overview Page
The main status page, which is displayed when clicking on “Status” in the navigation bar and
when logging in, is the “Config Overview” page.
Figure 12. Partial configuration overview page
The configuration overview page shows a summary of settings for the mesh interface, the
virtual access point interfaces, and the wired interface. The firmware version, uptime of the
device, and its operating mode are also displayed.