User's Manual

EnRoute50x/51x User’s Guide
TR0153 Rev. D2
92
12.4 Access Control Lists (ACLs)
Access control lists can be created for each of the access point interfaces and the mesh
interface.
12.4.1 Access Point Access Control Lists (ACLs)
The access control lists (ACLs) for the access point interfaces (wlan1-wlan4) block access to
any device with a MAC address matching those on the list. Individual ACLs can be defined for
each access point.
Web GUI
The ACLs can be defined via the web interface on the appropriate “wlanN” sub-tab under the
“ACL” tab on the “Security” page. Enter a MAC address and click on the “Add MAC” button to
add the address to the ACL for that access point. Once an address has been added, it will
appear at the bottom of the page. To delete a MAC address in an ACL, click on the “Delete
MAC” button next to the address.
The ACL for an access point must be enabled after it has been created. Choose “blacklist”
from the drop-down menu and click on “Change ACL Mode” to enable the list. Choose “none”
from the drop-down menu and click on “Change ACL Mode” to disable the ACL.
Figure 41. AP ACL configuration