Operation Manual

Port Commands
Mobility System Software Command Reference Guide
Version 7.3
5 – 46
clear port mirror
Removes a port mirroring configuration.
Syntax clear port mirror
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.2.
Examples The following command clears the port mirroring configuration from the switch:
MX# clear port mirror
See Also
● set port mirror on page 5-55
● show port mirror on page 5-64
clear port name
Removes the name assigned to a port.
Syntax clear port port-list name
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples The following command clears the names of ports 17 through 20:
MX# clear port 17-20 name
See Also
● set port name on page 5-56
● show port status on page 5-65
clear port preference
Deprecated in MSS Version 4.0. Use the clear port media-type command.
clear port type
Removes all configuration settings from a port and resets the port as a network port.
port-list List of physical ports. MSS removes the names from all the specified ports.
W arning!
When you clear a port, MSS ends user sessions that are using the port.