Operation Manual

RADIUS, LDAP, and Server Groups Commands
Mobility System Software Command Reference Guide
Version 7.3
17 – 422
(For information about RADIUS attributes, see the RADIUS appendix in the Trapeze Mobility
System Software Configuration Guide.)
clear ldap auth-port
Syntax clear ldap auth-port port
Defaults None
Access Enabled
History Introduced in MSS 7.1.
clear ldap base-dn
Syntax clear ldap base-dn basedn
Defaults None
Access Enabled
History Introduced in MSS 7.1.
clear ldap bind-mode
Syntax clear ldap bind-mode [simple-auth | sasl-md5]
Defaults None
Access Enabled
History Introduced in MSS 7.1
clear ldap deadtime
Syntax clear ldap deadtime min
Defaults None
Access Enabled
History Introduced in MSS 7.1
Usage Used to clear the deadtime configuration for an LDAP server.
Examples To clear an LDAP deadtime of five minutes, use the following command:
MX# clear ldap deadtime 5
success:change accepted
clear ldap mac-addr-format
Syntax clear ldap mac-addr-format format
Defaults None
Access Enabled
History Introduced in MSS 7.1.