Operation Manual

RF Detection Commands
RF Detection Commands
20 – 475
802.11 mgmt type 7 flood 0 0
802.11 mgmt type d flood 0 0
802.11 mgmt type e flood 0 0
802.11 mgmt type f flood 0 0
802.11 association flood 0 0
802.11 reassociation flood 0 0
802.11 disassociation flood 0 0
Weak wep initialization vectors 0 0
Spoofed access point mac-address attacks 0 0
Spoofed client mac-address attacks 0 0
Ssid masquerade attacks 1 12
Spoofed deauthentication attacks 0 0
Spoofed disassociation attacks 0 0
Null probe responses 626 11380
Broadcast deauthentications 0 0
FakeAP ssid attacks 0 0
FakeAP bssid attacks 0 0
Netstumbler clients 0 0
Wellenreiter clients 0 0
Active scans 1796 4383
Wireless bridge frames 196 196
Adhoc client frames 8 0
Access points present in attack-list 0 0
Access points not present in ssid-list 0 0
Access points not present in vendor-list 0 0
Clients not present in vendor-list 0 0
Clients added to automatic black-list 0 0
show rfdetect data
Displays information about the APs detected by an MX.
Syntax show rfdetect data
Defaults None.
Access Enabled.
History
Usage
You can enter this command on any MX in the Mobility Domain. The output applies only to
the MX on which you enter the command. To display all devices that a specific Trapeze radio has
detected, even if the radio is managed by another MX, use the show rfdetect visible command.
To display rogue information for the entire Mobility Domain, use the show rfdetect
mobility-domain command on the seed switch.
Only one MAC address is listed for each Trapeze radio, even if the radio is beaconing multiple
SSIDs.
Version 1.0 Command introduced.
Version 2.0 New option, verbose, added to include Trapeze devices and devices in the ignore list.
Version 3.0
❑ sweep-name, sentry-sweep, and verbose options deprecated.
❑ Fields rearranged to show BSSID first.
Version 4.0 Vendor, Type, and Flags fields added.
Version 7.0 Added 40 MHz channel information.
Version 7.1 Removed flags from output.