User's Guide

Redpine Signals, Inc. Proprietary and confidential Page 5
RS9110
-
N
-
11
-
02
Evalua
tion
Board
User Guide
Version 1.41
1: Introduction
The RS9110-N-11-02 evaluation board provides a complete IEEE 802.11bgn
Wireless LAN evaluation platform. This basically has the RS9110-N-02
802.11bgn WLAN module mounted on it along with few other supporting
components such as 40 Mhz reference oscillator and few other passives. The
RS9110-N-11-02 is a high-performance, low-power WLAN module.
The board connects to a host processor through SDIO or SPI interfaces. It
also provides the connectivity for the WLAN module to the Vector Signal
Generator (VSG) and Vector Signal Analyzer (VSA) through a microwave
coaxial connector switch.
The RS9110-N-11-02 evaluation board facilitates you in carrying out following
tests.
• Evaluation of the end–to-end throughput performance.
• Evaluation of the Transmit and Receive performance of the radio.
Figure 1 shows the block diagram of this evaluation board.
802.11bgn
WLAN Module
RS9110-N-11-02
GPIO HDR JTAG
SPI Interface
SD Memory CONN
Microwave Coaxial
Connector with
Switch
Power Probe
SDIO Edge Connector
Antenna
40MHz Osc
Figure 1: RS9110-N-11-02 Evaluation Board Block Diagram
The following picture illustrates various connectors on the RS9110-N-11-02
evaluation board