Product Overview

A THERMACO® Technology

TZSP-2PH

Trapzilla® Sample Ports

A Better Way to Sample

Municipal authorities around the world now require facilities to install a sampling port to gather and

test efuent wastewater. This includes a sample well or a separate chamber downstream of the facility.

In many cases, installation of a conventional sample well is a signicant expense. Trapzilla

Sample

Ports offer an affordable and accurate alternative to those large sample wells.

Easy, Versatile Installation

Trapzilla Sample Ports are designed for easy installation and

may be installed inside or outside the facility on the wastewater

drainage piping. An optional, eld-modiable extension collar is

available for installations where the piping is deep in the ground.

The Two-Piece Extension Collar freatures a telescoping design,

making it easier to cut and set. The Sample Ports are small and

lightweight and can be easily carried through regular doorways

and down commercial facility staircases for basement installations.

Works with any Interceptor

While Thermaco

recommends its use with Trapzilla Grease

Interceptors, a Trapzilla Sample Port can be used with any grease

interceptor, or oil/water separator on a 4” line. Additionally it can

be installed in facilities that are not required to use interceptors, but

are still expected to meet certain discharge standards (industrial

processes, commercial facilities).

Use with the Trapzilla GrabSampler™ for Easy Sampling

Thermaco recommends the use of its GrabSampler (sold separately),

specically designed to work with Trapzilla Sample Ports, for

optimal results. The GrabSampler is designed to nest in the TZSP-

40 or TZSP-48 and has a simple, adjustable jar carrier which can be

used at any angle to gather samples.

TZSP-40

4” (102 mm) Inlet/Outlet

0.5” (12.7 mm) Fall

TZSP-48

4” (102 mm) Inlet/Outlet

7.8” (198 mm) Fall

PAGE 1
Trapzilla® Sample Ports A Better Way to Sample Municipal authorities around the world now require facilities to install a sampling port to gather and test effluent wastewater. This includes a sample well or a separate chamber downstream of the facility. In many cases, installation of a conventional sample well is a significant expense. Trapzilla® Sample Ports offer an affordable and accurate alternative to those large sample wells.
PAGE 2
Trapzilla® Sample Ports Sample Port Use and Operation GS-1 GrabSampler (sold separately) Flume Inlet TZSP-40 The TZSP-40 can be installed on existing lines using its patented flume to narrow and accelerate incoming flows allowing horizontal sample filling access despite the lack of a substantial fall gradient. When sampling a TZSP-40, the GrabSampler lays nearly flat in the sample port. The TZSP-40 is also suitable for composite sampling applications.