Pass-Thru Solid Door Refrigerators Specification Sheet

ManualsBrandsTraulsen ManualsRefrigeratorG10002P

Project Quantity Item #

Model Specified: CSI Section 11400

SECTION

4-5

TRAULSEN

4401 BLUE MOUND RD. FT. WORTH, TX 76106

PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

Standard Product Features

• High Quality Stainless Steel Exterior Front and Doors

• Corrosion Resistant Anodized Aluminum One-Piece Sides

• Durable Anodized Aluminum Interior

• Microprocessor Control With LED Temperature Readout

•Top-Mounted, Balanced, Self-Contained Refrigeration System

• Large High Humidity Evaporator Coil Outside The Food Zone

• Load-Sure Guard Protects Against Improper Loading

• Full or Half Length Stainless Steel Doors With Locks

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Guaranteed For Life Horizontal Work Flow Door Handles

• Automatically Activated Incandescent Lights

• Damage Resistant Stainless Steel Breaker Caps

• Three (3) Adjustable Epoxy Coated Shelves Per Section,

Supported On Shelf Pins (installed at the factory)

• Energy Saving Automatic Non-Electric Condensate Evaporator

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Anodized Aluminum Door Liner

• Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device Provides Quick

Refrigeration Recovery Times

• Stainless Steel One-Piece Louver Assembly

• 9' Cord & Plug Attached

• Set of Four (4) 6" High Casters With Locks

• One Year Parts And Labor Warranty

• Five Year Compressor Warranty

Optional Accessory Kits

• Additional Epoxy Coated Shelves*

• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x

26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.

• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet

Pans (equips one full section)

• Universal Type Tray Slides* To Accommodate Either (1) 18" x

26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table

Pans, Adjustable To 4" O.C.

• Chrome Plated Shelves* (for use in lieu of standard shelving)

• 6" High Adjustable Legs (for use in lieu of standard casters)

•Two Year Service/Labor Warranty Available

*Please refer to spec sheet 4-7 for

optional accessory kit details

G-Series Pass-Thru Solid Door

Refrigerators/Self-Contained

Listed by Underwriters Laboratories Inc., to

U.S. and Canadian safety standards and

Listed by NSF International.

Approval: __________________________________

One & Two Section Models, 32" Deep

SERIES

Equipped with an

easy to use

microprocessor

control!

Stainless Steel

Front & Door(s)

NOTE: All optional accessory kits are shipped separately for

later installation by others at the jobsite.

Model G10012P

Model G20004P

Aside from their anodized aluminum side and interior finishes,

Traulsen’s G-Series "Dealer's Choice" models meet or exceed the

standard specifications and performance of most other brands top

tier product offerings. Reliable, energy efficient, and durable, with

large individual storage capacities, the high quality G-Series line-up

includes a wide range of one and two section pass-thru refrigerator

models, built in our most popular footprints. They are available with

either full or half height doors, and the added convenience of a

variety of different door hingings to choose from. In addition, each

also includes a number of user-friendly features, making them one

of the best overall equipment values in Foodservice today, and the

right fit for nearly any commercial application.

Control Side Other Side

Model # Door Hinging Hinging*

G10002P Half Right Right

G10003P Half Right Left

G10004P Half Left Left

G10005P Half Left Right

G10012P Full Right Right

G10013P Full Right Left

G10014P Full Left Left

G10015P Full Left Right

Single Section Models

Control Side Other Side

Model # Door Hinging Hinging*

G20004P Half Left/Right Left/Right

G20005P Half Left/Left Left/Left

G20006P Half Right/Left Right/Left

G20007P Half Right/Right Right/Right

G20014P Full Left/Right Left/Right

G20015P Full Left/Left Left/Left

G20016P Full Right/Left Right/Left

G20017P Full Right/Right Right/Right

AVAILABLE MODELS

Two Section Models

*Door hinging when viewed from that side.

Summary of content (4 pages)

PAGE 1
Project Quantity Item # Model Specified: CSI Section 11400 G-Series Pass-Thru Solid Door Refrigerators/Self-Contained One & Two Section Models, 32" Deep G Equipped with an easy to use microprocessor control! SERIES Stainless Steel Front & Door(s) Aside from their anodized aluminum side and interior finishes, Traulsen’s G-Series "Dealer's Choice" models meet or exceed the standard specifications and performance of most other brands top tier product offerings.
PAGE 2
Project Quantity Item # Model Specified: Elevation G10002P G10003P CSI Section 11400 Elevation G10004P G10005P Elevation G20007P Plan G10002P G10012P SECTION 4-5 Elevation G10012P G10013P Elevation G10014P G10015P Elevation G20004P Elevation G20015P Elevation G20014P Plan G10003P G10013P TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com Plan G10004P G10014P FT. WORTH, TX 76106 FAX-MKTG.
PAGE 3
Project Quantity Model Specified: Item # CSI Section 11400 Plan G20004P G20014P Plan G20005P G20015P Section View All Half Height Door Models Plan G20006P G20016P Plan G20007P G20017P Section View All Full Height Door Models TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com FT. WORTH, TX 76106 FAX-MKTG.
PAGE 4
Project Quantity Item # Model Specified: CSI Section 11400 Specifications Construction, Hardware and Insulation Cabinet exterior front, louver assembly and doors are constructed of 20 gauge stainless steel. Cabinet sides (including returns), interior and door liners are constructed of anodized aluminum. The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are included.