Digital camera What your 3 year warranty* means Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 3 years after the date of purchase, we will rectify the problem as quickly as possible once it has been brought to our attention.
READ THIS FIRST Trademark Information Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. Pentium® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Inc. SD™ is a trademark. SDHC™ is a trademark. Other names and products may be trademarks or registered trademarks of their respective owners. Product Information Product design and specifications are subject to change without notice.
SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power off and remove the batteries. Continued use might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power off and remove the batteries. Continued use might cause fire or electric shock. Consult the store of purchase.
Cautions Load the batteries paying careful attention to the polarity (+ or –) of the terminals. Loading the batteries with their polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes. This might cause damage to the person’s eyesight. Do not subject the LCD monitor to impact. This might damage the glass on the screen or cause the internal fluid to leak.
Notes on Battery Usage When you use the batteries, carefully read and strictly observe the Safety Instructions and the notes described below: Use only the specified batteries. Avoid extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. Therefore Ni-MH rechargeable batteries are highly recommended.
CONTENTS 7 INTRODUCTION 26 MENU OPTIONS 7 7 Overview Package Contents 8 GETTING TO KNOW YOUR CAMERA 26 28 29 30 8 8 9 Front View Rear View LCD Monitor Display 11 GETTING STARTED 11 Preparation 12 Initial Settings 14 CAPTURE MODE 14 Capturing Images 15 Setting the Scene Mode 16 Taking Images with Intelligent Scene mode 17 Setting the Panorama Mode 17 Taking Images When the Smile Feature Is On 18 Recording Shots using Face Detection Technology 18 AF Tracking Mode 19 Self-portrait Function 19 Fin
INTRODUCTION Overview Congratulations on your purchase of the new digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. Equipped with a 14.0-megapixel CCD, this camera is capable of capturing images with a resolution of up to 4288X3216 pixels.
GETTING TO KNOW YOUR CAMERA Front View 5 1. Shutter button 2. ON/OFF Power button 3. Flash 4. Self-timer LED 5. Microphone 6. USB terminal 7. Lens Rear View a. LCD monitor b. Status LED c. Strap holder d. Battery / Memory card cover e. Tripod socket Item Capture Mode 1. Shutter button 2. 3. 4. 5. 6. 7. 8. 9. 10.
LCD Monitor Display Capture mode 1. Zoom status 2. Available number of shots 3. Storage media [ ] SD/SDHC memory card 4. Battery condition [l] Full battery power [o] Medium battery power [n] Low battery power [m] No battery power 5. Focus setting [K] Auto [ ] AF Tracking [ ] Face Detect [O] Macro [Q] Infinity 6. Flash mode [b] Auto [a] Flash On [d] Flash Off [c] Red-eye [`] Slow Sync [_] Pre-flash 7. [s] Exposure compensation 8. Self-timer & Self-portrait icon [i] Off [ ] Self-portrait [f] 2 sec.
Video mode 1. Zoom status 2. Storage media 3. Battery condition 4. Focus setting 5. Flash mode 6. Self-timer icon 7. Video resolution 8. Available recording time/Elapsed time 9. Date and time 10. Video quality 11. Audio off icon 12. Mode icon 13. Main focus area 1 3 2 12 11 4 10 5 6 7 00:00:00 / 02:28:49 2010.01.01 13:15 9 8 13 Playback mode - Still image playback 1. DPOF icon 2. Protect icon 3. File/Folder number 4. Storage media 5. Battery condition 6. Image size resolution 7.
GETTING STARTED Preparation 1. Attach the camera strap. 2. Open the battery/memory card cover. 3. Insert the supplied batteries with correct orientation as shown. 4. Insert an SD/SDHC memory card (Optional). Be sure to format the memory card with this camera before its initial usage. 5. Close the battery/memory card cover and make sure it is locked securely.
Initial Settings The date/time needs to be set if and when: The camera is turned on for the first time. The camera is turned on after leaving the camera without the batteries for an extended period of time. 1. Press the ON/OFF button to turn the power on. 2. Press any button to enter language setup. Select the displayed language with the e / f / c / d buttons and press the SET button. 3. Select the date format with the c / d buttons, and press the SET button. 4.
Choosing the Language Specify in which language menus and messages are to be displayed on the LCD monitor. 1. Press the MODE button, and set the camera mode to [ ] or [ ]; or press the 7 button. 2. Press the MENU button. 3. Select the [Setup] at the end of the Menu with the c / d buttons, and press the SET button. 4. Select [Language] with the c / d buttons and press the SET button. 5. Select the displayed language with the e / f / c / d buttons and press the SET button. The setting will be stored. 6.
CAPTURE MODE Capturing Images Your camera is equipped with a 2.7" full color TFT LCD monitor to help you compose images, playback recorded images/video clips or adjust menu settings. 1. Press the ON/OFF button to turn the power on. 2. Press the MODE button, and set the camera mode to [ ]. 3. Compose your image in the LCD monitor. Turn the zoom lever to side to zoom in on the subject, and enlarges the subject on the LCD monitor.
Setting the Scene Mode By simply selecting one of the available 25 scene modes, you can capture the image with the most appropriate settings. 1. Press the MODE button, and set the camera mode to [ ], and press the SET button. 2. Select the desired scene mode with the e / f / c / d buttons, and press the SET button. 3. Compose the image and press the shutter button.
Scene mode Description Landscape Select this mode when you want to capture an image with infinity focus, hard sharpness and high saturation. Sports Select this mode when you want to capture fast-moving subjects. Night Portrait Select this mode when you want to capture people with an evening or night scene background. Night Scene Select this mode when you want to capture dark scenes such as night views.
Setting the Panorama Mode This mode is designed to make it easier to take a series of shots then stitch them together with software to make a single image. You can capture a photographic subject that won’t fit into a single frame, such as a landscape, and stitch it together later with a program such as Arcsoft Panorama Maker® 4.0 application. 1. Press the MODE button, and set the camera mode to [ ], and press the SET button. 2. Select [Panorama] with the e / f / c / d buttons, and press the SET button.
Recording Shots using Face Detection Technology Face Detection Technology can identify and focus on the human faces in the image. 1. Press the MODE button, and set the camera mode to [ ]. 2. Press the button, and select [ ] icon with the e / f buttons. Press the SET button. With Face Detection turned on, the camera identifies main face (white frame) and subsidiary faces (gray frames). If the camera cannot detect and track any faces, there will be no frame shown on the screen. 3.
Self-portrait Function Use this function to take pictures of yourself or include yourself in pictures. 1. Press the MODE button, and set the camera mode to [ ]. 2. Press the e button, and select [ ] icon with the e / f buttons. Press the SET button. 3. Press the shutter button. 4. If the camera detect and track any faces, after twice blinking of the self-timer LED, one image will be captured. Press the shutter button to exit.
VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 / 720p pixels. 1. Press the MODE button, and set the camera mode to [ ]. 2. Compose the image. 3. Press the shutter button. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip. The recording time depends on the storage size and the subject of the image to be recorded.
PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. 1. Press the 7 button. The last image appears on the screen. 2. The images can be displayed in forward or reverse sequence with the e / f buttons. To view the previous image, press the e button. To view the next image, press the f button. Turn the zoom lever to side enlarges the image. To return to normal magnification, turn the zoom lever to side. An [ ] icon is displayed with the video data.
Removing Red-eye You can use this function to remove the red-eye effect after an image is taken. 1. Press the 7 button. The last image appears on the screen. 2. Select the image that you want to edit with the e / f buttons. 3. Press the MENU button. 4. Select [Fix Red Eyes] with the c / d buttons, and press the SET button. 5. Select [Execute] with the e / f buttons, and press the SET button. 6. View the changes on the corrected image. 7.
Protecting Images Set the data to read-only to prevent images from being erased by mistake. 1. Press the 7 button. The last image appears on the screen. 2. Select the image that you want to protect with the e / f buttons. 3. Press the MENU button. 4. Select [Protect] with the c / d buttons, and press the SET button. 5. Select [Single] or [All] with the e / f buttons, and press SET button. 6. Select [Set] with the e / f buttons, and press the SET button.
DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. 1. Press the 7 button. The last image appears on the screen. 2.
Erasing Images Erasing a single image / Erasing all images The quick delete function enables you to delete the last captured image during capture. 1. Press the 7 button. The last image appears on the screen. 2. Select the image you want to erase with the e / f buttons. 3. Press the MENU button. 4. Select [Delete] with the c / d buttons, and press the SET button. 5. Select [Single] or [All] with the e / f buttons, and press the SET button. [Single]: Erases the selected image or the last image.
MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. 4 MP AUTO MENU ; SET ; MENU ; SET ; Press the ON/OFF button to turn the power on. Press the MODE button, and set the camera mode to any scene mode. Press the MENU button to enter the [Capture] menu. Select the desired option item with the c / d buttons, and press the SET button to enter its respective menu. The selectable items may vary in different capture modes. 5.
Color This sets the color of the image that will be captured. Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple Saturation This sets the saturation of the image that will be captured. High / Standard / Low Metering This sets the metering method for calculating the exposure. Center: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.
Video Menu This menu is for the basic settings to be used when recording video clips. MENU ; SET ; MENU ; SET ; 1. Press the MODE button, and set the camera mode to [ ]. 2. Press the MENU button to enter the [Video] menu. 3. Select the desired option item with the c / d buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the e / f buttons, and press the SET button. 5. To exit from the menu, press the MENU button.
Playback Menu In the [7] mode, choose which settings are to be used for playback. ; ; MENU ; SET ; 1. Press the 7 button. 2. Press the MENU button. 3. Select the desired option item with the c / d buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the e / f buttons, and press the SET button. 5. To exit from the menu, press the MENU button. Delete Refer to the section in this manual titled “Erasing Images” for further details.
Setup Menu Set your camera’s operating environment. Off ; ; MENU ; SET ; 1. Press the MODE button, and set the camera mode to [ ] or [ ]; or press the 7 button. 2. Press the MENU button. 3. Select the [Setup] at the end of the Menu with the c / d buttons, and press the SET button. 4. Select the desired option item with the c / d buttons, and press the SET button to enter its respective menu. 5. Select the desired setting with the e / f buttons, and press the SET button. 6.
Light Freq. This camera supports different lighting frequencies: 50 Hz and 60 Hz. When photographing under fluorescent lighting, select the correct frequency setting depending in your local area's voltage. 50 Hz / 60 Hz LCD Bright. Select a brightness level for the LCD monitor. Standard / Bright Format Refer to section in this manual titled “Formatting the Memory Card” for further details. Media Info. This displays the free capacity of the internal memory or the memory card. Sys. Info.
TRANSFERRING FILES TO YOUR COMPUTER System Requirement Windows Pentium III 1GHz or equivalent Windows XP/Vista/7 512MB RAM 150MB available hard disk space CD-ROM drive Available USB port Macintosh PowerPC G3/G4/G5 OS 10.3.9 or later 256MB RAM (512 MB recommended) 128MB available hard disk space CD-ROM drive Available USB port Downloading Your Files 1. Connect one end of the USB cable to an available USB port on your computer. 2.
EDITING SOFTWARE INSTALLATION There are 2 types of software that are included on the CD-ROM: ArcSoft MediaImpression™ - Easily, creatively, and productively manage your multimedia files. Create your own movies or photo slide shows, and share your photo, video and music files easily through simple email attachments or popular photo printing and video sharing websites. Arcsoft Panorama Maker® 4.
SPECIFICATIONS Item Description Image sensor 1/2.33” CCD sensor (14.0 megapixels) Image resolution Still image 14M(4288x3216),8M(3264x2448),4M(2304x1728), 2M(1600x1200) ,VGA(640x480) Video clip HD(720p)/30fps, VGA(640x480)/30fps, QVGA(320x240)/30fps LCD monitor 2.7” full color TFT LCD (230K pixels) Recording media Supports SD/SDHC memory card (up to 32GB) (optional) File format DCF, JPEG (EXIF 2.2), DPOF, Motion-JPEG (AVI), HD720p/ 30fps Lens 3x optical zoom lens Aperture range: 3(W) - 5.
APPENDIX Possible Number of Shots Possible number of shots (still image) The table shows the approximate shots that you can capture at each setting based on the capacity of the internal memory and the SD/SDHC memory card.
Troubleshooting Refer to the symptoms and solutions listed below before sending the camera for repairs. If the problem persists, contact your local reseller or service center. Symptom Cause The power does not come The batteries are not inserted. on. The batteries are exhausted. Solutions / Corrective Actions Load the batteries correctly. Replace with a new set of batteries. The batteries or camera feels warm. Long period of continuous use of the camera or the flash.
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.
