Operation Manual

13
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD moni-
tor.
1. Press the SET button, and set the camera mode
to [ ] or [ ]; or press the 7 button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
c / d buttons, and press the SET button.
4. Select [Language] with the c / d buttons and
press the SET button.
5. Select the displayed language with the e / f / c
/ d buttons and press the SET button.
 The setting will be stored.
6. To exit from the [Setup] menu, press the MENU button.
Formatting the Memory Card
This utility formats the memory card and erases all stored images and data.
1. Press the SET button, and set the camera mode
to [ ] or [ ]; or press the 7 button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with
the c / d buttons, and press the SET button.
4. Select [Format] with the c / d buttons, then
press the SET button.
5. Select [Execute] with the e / f buttons, and
press the SET button.
 To cancel formatting, select [Cancel] and
press the SET button.
6. To exit from the [Setup] menu, press the MENU
button.
MENU SET
;;
MENU SET
; ;
SetExit
Format
Next Menu
Media Info.
Next Menu
Sys. Info.
Next Menu
MENU SET
; ;