Operation Manual

18
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Mode of Skin Soften and De-blemish
In order to make face taken look better and younger, mode of Skin Soften is added to
reduce artifacts on faces, while the mode of De-blemish is to reduce obvious blemishes
and big spots on faces.
1. Press the SET button, and set the camera mode to [ ], and press the SET button.
2. Select [Skin Soften] or [De-blemish] with the e / f / c / d buttons, and press the
SET button.
3. Compose the image, and press the shutter button down fully.
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
1. Press the SET button, and set the camera mode to [ ].
2. Press the button, and select [ ] icon with the e / f buttons. Press the SET
button.
 With Face Detection turned on, the camera identifies main face (white frame)
and subsidiary faces (gray frames).
 If the camera cannot detect and track any faces, there will be no frame shown on
the screen.
3. Press the shutter button halfway down to lock the
focus.
 When the main face is in focus, the white frame
simultaneously turns green. Otherwise, it turns
red.
4. Press the shutter button down fully to capture your
image.
 Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turns sideways.
Main Face(Green Frame)
Focus Lock