Operation Manual

21
Loading an SD Memory Card
You camera is delivered with a 32MB SD memory card allowing you to store
images and video clips in the camera. However, you can also expand the
memory capacity by using a higher size SD memory card. Additional SD
memory cards provide removeable, reusable storage for images and video
clips.
1. Make sure your camera is off.
2. Slide the SD card/battery cover lock.
3. Insert the SD memory card.
 If the card cannot be inserted, check the orientation.
4. Close the SD card/battery cover lock firmly.
Note:
 To prevent valuable data from being accidentally erased from
an SD memory card you can slide the write protect tab (on the side of the SD memory card) to “LOCK”.
 To save, edit, or erase data on an SD memory card, you must unlock the card.
To remove an SD memory card
1. Make sure your camera is off.
2. Slide the SD card/battery cover lock.
3. Press lightly on the edge of the memory card and it will eject.
Note:
 Memory cards may become hot during use; observe due caution when removing memory cards.