Operation Manual

28
E
F
S
G
Using the Flash
The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an
image using a suitable flash mode to your circumstances. If you change the flash mode, the camera will retain that
setting even if the camera is turned off.
1. Open the lens cover and press the POWER button to turn on your camera.
2. Set the scene mode in the Capture menu based on the desired scenery.
(Auto/Sports/Night Scene/Portrait/Landscape/Back Light).
3. Press the [ ] button located on the rear side of the camera repeatedly
until your desired flash mode appears on the LCD monitor.
4. Compose your image and press the shutter button.
The camera has four flash modes: Fill flash (on), Flash off, Automatic flash
and Red-eye reduction.