Operation Manual

EN-24
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the x button.
2. Select the image that you want to protect with
the e / f buttons.
3. Press the MENU button.
4. Select [Protect] with the c / d buttons, and
press the SET button.
5. Select [Single] or [All] with the c / d buttons,
and press the SET button.
6. Select [Set] with the c / d buttons, and press
the SET button.
 Protection is applied to the image and the
camera returns to the previous menu mode.
 The protect icon [y] is displayed with
protected images.
When [All] has been selected, [ y ] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display
the image on which you want to remove the image
protection.
1. Select [Protect] with the c / d buttons from the
playback menu, and press the SET button.
2. Select [Single] or [All] with the c / d buttons,
and press the SET button.
3. Select [Cancel Protect] with the c / d buttons,
and press the SET button.
 The removal of image protection is executed and the camera returns to the
previous menu mode.
Protecting multiple images simultaneously
1. Select [Protect] with the c / d buttons from the playback menu, and press the SET button.
2. Select [Select] with the c / d buttons, and press the SET button.
 The images are displayed in the thumbnail display.
3. Select the images you want to protect with the e / f / c / d buttons, and press the x button.
 The protect icon [y] is displayed with protected images. Selecting a protected
image and pressing the x button again will cancel the protection. This
procedure is repeated to select multiple images.
4. Press the SET button.
 Protection and cancellation of the protection are executed and the camera
returns to playback mode.
 Formatting an SD/SDHC memory card or internal memory overrides protection, and erases all
images regardless of their protected status.
Protect
Protect
Protect
Protect