Operation Manual

ManualsBrandsTraveler ManualsDigital CameraDC-8500

Helpline No. UK/Ireland 00800/7877 2368

Web Support www.Traveler-service.com/uk

Model Number:DC 8500

Connecting to a PictBridge Compatible Printer

Read this section if the model you purchased is included with the PictBridge functions.

If a printer that supports PictBridge is available, images can be printed by connecting the dig-

ital still camera directly to the PictBridge-compatible printer without using a computer.

Connecting the camera to the printer

1. Connect one end of the USB cable to your camera.

2. Connect the other end of the USB cable to the

USB port on the printer.

3. Turn on your camera.

4. The [USB] screen is displayed. Select [Printer]

with the

c / d

buttons, and press the

SET

button.

Printing images

When the camera is properly connected to a PictBridge compatible printer, the Pict-

Bridge menu is displayed on the monitor.

1. Select the item you want to configure with the

c / d buttons, and press the SET button.

 [Images]:Select whether you want to print a

specific image or all images. You may also

select the printing number for a specific

image.



[Date Print]:Depending on the printer type,

select whether you want to print the image

with date imprint or not.

 [Paper Size]:Select the desired paper size dep

ending on

the printer type.

 [Layout]:Select the desired printing layout dep

ending on

the printer type.

 [Print]:After all settings are configured, select this item to start printing.

2. If you select [Images] in the previous step,

the figure shown on the right hand side will

appear. Select [Select], [All] or [DPOF] with

the c / d buttons, and press the SET button.

 [Select]:Select to print one specific image.

 [All]:Select to print all images.

 [DPOF]:Select to print images with DPOF

settings.

 [Exit]:Exit from Images option.

PictBridge

SET:Enter

Images

APPENDIX