Operation Manual

Helpline No. UK/Northern Ireland 00800-78772368 Rep . Ireland 00800-78772368

Web Support

www.Traveler-service.com/uk

Model Number:DC-XZ6

Turning the Power On/Off

1. Load the battery or connect the AC power adapter to your

camera.

2. Press the POWER button to turn on your camera.

J The status LED lights up green and the camera is initiated.

J The power indicator light turns on when the camera power is

turned on.

J When the power is turned on, the camera will start in the

mode which was selected at last use.

3. To turn off your camera, press the POWER button again.

J The power is turned off automatically when the camera has not been operated for a defined period

of time. To resume operation, turn the power on again. Refer to section in this manual titled “Auto

OFF” in the Setup1 Menu for further details.

J When the power is turned on, it may take several seconds to charge the flash. While the flash is

being charged, the status LED lights up orange.

J The camera is not ready until the flash has charged. The camera is ready when the status LED

is off.

Getting Started

To prevent valuable data from being accidentally erased from an SD

memory card you can slide the write-protected tab (on the side of the

SD memory card) to “LOCK”.

However, to save, edit or erase data on an SD memory card, you must

unlock the card.

Be sure to format an SD memory card with this digital camera before using it. Refer to section in

this manual titled “Formatting an SD Memory Card or Internal Memory” for further details.

To prevent any damage to an SD memory card, please turn off the power before inserting or

removing the SD memory card. If you insert or remove the SD memory card with the power

switched on, the camera turns off automatically.