Operation Manual

Helpline No. UK/Northern Ireland 00800-78772368 Rep . Ireland 00800-78772368

Web Support

www.Traveler-service.com/uk

Model Number:DC-XZ6

Changing the Camera Start Logo Image

You can specify the start logo image for your camera. You can select the new start logo image from the

captured still images.

1. Slide the mode switch to [ ].

2. Select the image that you want to use with the W / X buttons.

3. Press the MENU button.

J The playback menu is displayed.

4. Select [Setup1] with the X button.

5. Select [Start Logo] with the S / T buttons, and press the SET button.

6. Select [User Image] with the S / T buttons, and press the SET button.

7. Select [Execute] with the S / T buttons, and press the SET button.

J This new start logo image will be activated the next time you turn on the camera.

J User selected image is saved in the special area of the internal memory. In case of formatting the

internal memory, the user selected start logo image will not be lost.

J “NO IMAGE” message is displayed when “User Image” is selected and no images are

stored in the SD memory card or internal memory.

J If the image recorded voice memo is selected to be the start logo image, the voice memo function

will fail.

J Only one user image can be saved. The previous start logo image can not be recovered if you select

a user image as a new start logo image.

Playback Mode